Curing Agents Archives

Curing Agents

QR Polymers provide curing agents for epoxy resins, mainly for applications at room temperature. These are as varied as ambient curing paints for metal or for concrete (industrial anticorrosion paints, marine anticorrosive primers, pipe coatings or tank linings), civil engineering applications such as self-levelling or trowellable floorings, mortars, concrete repair, concrete modification, tank laminating, or adhesives for tiles or concrete.

Our curing agents are of various types: unmodified and modified aliphatic or cycloaliphatic amines, epoxy/(cyclo)aliphatic amine adducts, poly(amino)amides and their adducts, Mannich bases and various special curing agents, including waterbornes.

Hardeners	Solids (% m/m)	Viscosity @25°C (mPa.s)	HEW (g/Eq)	Gel time (minutes) (a)	Uses and comments
Accelerators
Q-RIT 054	100	100-300	-	-	2,4,6-tris(dimethylaminomethyl)phenol. Accelerator for epoxy/polyamine and epoxy/polyamide systems. phr 5-15
Amines and modified amines
Q-RIT 118	100	5-20	32	-	Long gel time at ambient cure and high Tg if heat-cured. For construction, paints, adhesives and composites applications. phr 17 (liquid resin, EEW 190)
Q-RIT 120	100	5-20	43	130-190	Isophoronediamine (IPDA). Good heat resistance. Applications in construction, paints, composites and castings. phr 23 (liquid resin, EEW 190)
Q-RIT 122	100	5-10	34	-	M-xylenediamine (MXDA). Applications in construction, paints and composites. phr 18 (liquid resins, EEW 190)
Q-RIT 124	100	10-20	43	10-25	N-aminoethylpiperazine (N-AEP). Applications in construction, paints, adhesives and composites. phr 23 (liquid resin, EEW 190)
Q-RIT 125	100	5-10	21	25	Diethylenetriamine (DETA). Applications in construction, paints, adhesives and composites. phr 11 (iquid resin, EEW 190)
Q-RIT 126	100	20-30	24	25	Triethylenetetramine (TETA). Applications in construction, paints, adhesives and composites. phr 13 (liquid resin, EEW 190)
Q-RIT 128	100	20-60	27	26	Tetraethylenepentamine (TEPA). Provides high Tg. Applications in construction, paints, adhesives and composites. phr 14 (liquid resin, EEW 190)
Q-RIT 130	100	5-15	60	> 8h	Low molecular weight polyetheramine. Long pot-life, flexibility. Good impregnation. High filler loadings. For solventfree paints, floorings, mortars or adhesives. phr 32 (liquid resin, EEW 190)
Q-RIT 131	100	15-30	111	> 8h	Polyetheramine, Mw 400. Long pot-life, flexibility, good impregnation. High filler loadings. For solventfree paints, floorings, mortars or adhesives. phr 58 (liquid resin, EEW 190)
Q-RIT 132	100	50-150	82	-	Polyoxypropylenetriamine. Long pot-life. Provides flexibility and thoughness. phr 43 (liquid resin, EEW 190)
Q-RIT 154	100	20-80	90	15-20	Modified cycloaliphatic polyamine. Low viscosity, good impregnation, high filler loadings. Fast curing. phr 47-50 (liquid resin, EEW 190)
Q-RIT 155	100	150-450	95	30	Modified cycloaliphatic polyamine. Economical hardener. Benzyl alcohol-free. For adhesives, mortars and primers. phr 50 (liquid resin, EEW 190)
Q-RIT 163	100	18-48	40	-	For use in composite materials (fiber reinforced laminates) or adhesives. phr 21 (liquid resin, EEW 190)
Q-RIT 164	100	35-65	39	-	Faster than Q-RIT 163. For use in composite materials (fiber reinforced laminates) or adhesives. phr 20.5 (liquid resin, EEW 190)
Q-RIT 168	100	5-20	38	140-200	Provides hardness, high Tg, excellent heat resistance. For use in construction, tank linings and composites materials. phr 20 (liquid resin, EEW 190)
Amine and cycloaliphatic amine adducts
Q-RIT 304	100	250-500	115	40	UV-resistance. Good mechanical and chemical resistance. For solvenfree self-leveling and trowelable floorings, paints or adhesives. phr 60 (liquid resin, EEW 190)
Q-RIT 305	100	400-700	105	30-35	UV-resistance. Good mechanical and chemical resistance. For solvenfree self-leveling and trowelable floorings, paints or adhesives. phr 55 (liquid resin, EEW 190)
Q-RIT 306	100	550-850	115	25	UV-resistance. Good mechanical, acid and solvent resistance. Faster than Q-RIT 305. phr 60 (liquid resin, EEW 190)
Q-RIT 315	100	200-500	115	30	Salicylic acid-free. UV-resistance. Good mechanical, acid and solvent resistance. phr 60 (liquid resin, EEW 190)
Q-RIT 317	100	150-450	93	40	Salicylic acid-free. Superior resistance to carbamation / waterspotting. Good colour stability, good chemical resistance. For solvenfree self-leveling floorings, and paints. phr 50 (liquid resin, EEW 190)
Q-RIT 318	100	100-350	93	30	Salicylic acid-free. Superior resistance to carbamation / waterspotting. Good colour stability, good chemical resistance. For solvenfree self-leveling floorings, and paints. phr 50 (liquid resin, EEW 190)
Q-RIT 357	100	150-450	93	30-35	Superior resistance to carbamation / waterspotting. Good colour stability, good chemical resistance. For solvenfree self-leveling and trowelable floorings, and paints. phr 50 (liquid resin, EEW 190)
Q-RIT 358	100	350-550	93	20-25	Superior resistance to carbamation / waterspotting. Good colour stability, good chemical resistance. For solvenfree self-leveling and trowelable floorings, and paints. phr 50 (liquid resin, EEW 190)
Q-RIT 369	100	300-550	90	19	UV resistance. Good resistance to carbamation / waterspotting and to chemicals. For floorings, fibre reinforced composites and decorative table tops. phr 50 (liquid resin, EEW 190)
Q-RIT 369LE	100	Typically 600	90	45	UV resistance. Low exotherm/low reactivity version of Q-RIT 369 for use in thick castings, river tables, decorative applications. phr 50 (liquid resin, EEW 190)
Q-RIT 380	100	1400-2400	75	8-10	High reactivity, low temperature cure. Superior chemical resistance. Accelerator for other hardeners. Alternative to Mannich bases. For solvenfree floorings. phr 40 (liquid resin, EEW 190)
Q-RIT 381	100	1000-4000	84	15-16	Salicylic acid-free, benzyl alcohol-free. O VOC. Superior chemical resistance. Alternative to Mannich bases. phr 45 (liquid resin, EEW 190)
RD-0190	100	Typically 800	93	30	Benzyl alcohol-free. O VOC. Excellent waterspot resistance. For use in floorings and other contruction applications. phr 50 (liquid resin, EEW 190)
Amidoamines
Q-RIT 431	100	400-800	75	55	For solventfree paints, self-leveling and trowelable floorings, mortars, patching compounds and adhesives. Can be used on green concrete. phr 40 (liquid resin, EEW 190)
Q-RIT 436	100	500-1200	90	70-80	For solventfree self-leveling and trowelable floorings, mortars, patching compounds, adhesives and encapsulation systems. Can be used on green concrete. phr 47-50 (liquid resin, EEW 190)
Q-RIT 439	100	150-450	95	150	Low viscosity/long potlife curing agent for solventfree concrete primers, repair mortars, crack injection, castings, adhesives and tiles joints. Can be used on green concrete. phr 50 (liquid resin, EEW 190)
Polyamides
Q-RIT 515X70	70	800-1500	340	Several hours	Very good resistance to corrosion and chemicals. For solventborne anticorrosion paints. Excellent flexibility and adhesion. Use with solid epoxy resin (solution).
Q-RIT 525	100	10000-14000	130	90	Good flexibility and adhesion, good resistance to corrosion and to chemicals. For adhesives and solventborne or solventfree anticorrosion paints. Use with liquid or solid epoxy resins (solution).
Q-RIT 541	100	1000-3000 (b)	95	140	Good flexibility and adhesion, good substrate wetting, good temperature resistance. For adhesives, solventborne anticorrosion paints and concrete repair. phr 50 (liquid resin, EEW 190)
Polyamide adducts
Q-RIT 622XB70	70	4000-10000	350	Several hours	Outstanding flexibility, resistance to humidity and corrosion. Cures at up to 70% relative humidity. For solventborne anticorrosion paints. Use with solid epoxy resin (solution).
Q-RIT 623XB60	60	800-2400	520	Several hours	Outstanding flexibility, resistance to humidity and corrosion. Cures at up to 80% relative humidity. For solventborne anticorrosion paints. Use with solid epoxy resin (solution).
Q-RIT 635XB80	80	2000-8000	190	Several hours	General purpose high-solids curing agent for heavy duty coatings. Low temperature/high humidity cure. Use with high-solids or solid resin (phr 40, resin EEW 450-500).
Q-RIT 651	100	500-1500	115	40-45	Good substrate impregnation, outstanding adhesion to humid substrates and very good corrosion protection. For solventfree concrete primers, coatings and adhesives. phr 60 (liquid resin, EEW 190)
Q-RIT 653	100	250-500	115	30-40	Good substrate impregnation, outstanding adhesion to concrete and to humid substrates. Very good corrosion protection. For solventfree concrete coatings, concrete repair and high-solids primers. phr 60 (liquid resin, EEW 190)
Q-RIT 655	90	2000-6000	190	Up to 2 hours	Excellent flexibility, good humidity and corrosion resistance. Adhesion on humid concrete. Underwater cure. For high-solids anticorrosion coatings and adhesives. phr 100 (liquid resin, EEW 190)
Q-RIT 657	100	1500 - 4000	125	80-90	Low viscous. Outstanding adhesion to concrete. For high-solids or solventfree anticorrosion coatings, sealers and coatings for condrete. phr 60-80 (liquid resin, EEW 190)
Q-RIT 661	100	800 - 2000	130	30-35	Very fast and low viscous. For high-solids primers, industrial or maintenance paints, concrete sealers, adhesives and putties. phr 60-80 (liquid resin, EEW 190)
(a) with a liquid resin (EEW 190), 100 g mix, measured @23°C (b) measured @ 40°C

Download printable version

Waterborne curing agents: Click here

Waterborne products

Today, the civil engineering and coatings industries are without any doubt convinced of the advantages of using waterborne epoxy systems: these systems are environment‑friendly, they offer enhanced work comfort (less smell) and reduced toxicity for the applicators working in closed areas. They are not flammable, they allow for easy cleaning of the application tools with water. These systems also do exhibit excellent adhesion on concrete and on humid surfaces, and they can even be used on wet concrete.

However, formulators are still reluctant to switch to waterborne epoxy binders because they still encounter problems using those:

waterborne systems tend to cure slowly; their application thickness is often limited; the final gloss of cured coatings is also known to be poor, because of an imperfect film formation process. Finally, the protective efficiency of aqueous epoxy formulations, in particular on metal, is regularly questioned and does not always attain the performances achieved by their non-aqueous counterparts.

In QR-Polymers, we believe we can offer waterborne curing agents which address these concerns. Through R&D and close cooperation with our customers, we are continuously improving and expanding our product range to meet today and tomorrow market requirements.

A summary of our main waterborne products can be found below.

Hardeners	Solids (% m/m)	Viscosity @25°C (mPa.s)	HEW (g/Eq)	Gel time (minutes)	Uses and comments
Q-RIT 1051	50	30000-50000	210	120-180 (a) ≥ 6 hours (b)	Aqueous epoxy-polyaminoamide adduct without cosolvent, for concrete and metal coatings. Enables to emulsify epoxy resins in water. Good adhesion on metal and mineral substrates, including wet concrete. Use with liquid epoxy resin (phr 110, resin EEW 190) or with solid dispersion.
Q-RIT 1061	50	13000-23000	210	120-180 (a) ≥ 6 hours (b)	Universal aqueous epoxy-polyaminoamide adduct without cosolvent, for concrete and metal coatings. Enables to emulsify epoxy resins in water. Excellent adhesion on a variety of substrates. Dilutable to very low solids for a good impregnation of concrete. High flexibility, ideal for use on metal. Outstanding corrosion protection when combined with solid resin. Use with liquid epoxy resin (phr 110, resin EEW 190) or with solid dispersion.
Q-RIT 1071	55	18000-28000	230	60 (a) ≥ 6 hours (b)	Aqueous amine-adduct without cosolvent for general industrial coatings, floorings, epoxy-modified concrete, grouts. Formulation of thick systems. Very fast hardening and early water resistance. Use with liquid epoxy (phr 120, resin EEW 190) or with solid resin dispersion.
Q-RIT 1075	40	15000-35000	415	90 (a) 120 (b)	Aqueous amine-adduct without cosolvent for metal and concrete coatings. Excellent water and salt spray resistance. Fast physical drying, full cure after 2-3 days. Low colour and high UV-resistance with good gloss retention. Use with liquid epoxy (phr 220, resin EEW 190) or with solid resin emulsion.
RD-0205WH	70	Typically 10000	180	60 (a) ≥ 6 hours (b)	Amine-adduct, 70% solids in propylene glycol n-butyl ether. For waterborne dispersions. Can emulsify epoxy resins. Highly pseudoplastic. Can be charged with zinc in the formulation of zinc rich primers. Use with liquid epoxy (phr 100, resin EEW 190) or solid resin dispersion.
(a) with liquid resin (EEW 190), 100 g mix, measured @23°C (b) with solid resin dispersion (EEW 450-560 on 100% solid), 100 g mix, measured @23°C

Download a printable version

Resins	Solids (% m/m)	Viscosity @25°C (mPa.s)	EW (g/Eq)	Uses and comments
E-Pos 1011W55	55	800-5000	480-560 (a)	Aqueous dispersion of solid epoxy resin. For anticorrosive, industrial coatings and civil engineering applications (concrete sealers). Long pot-life, very good chemical resistance and mechanical properties.
E-Pos 1014	100	1500-4000	190-250	Emulsifiable liquid epoxy resin. For civil engineering applications (concrete sealers/primers, floorings, tile joints, cement modification…), adhesives.
E-Pos 1014W60	60	3000-13000	190-250 (a)	Aqueous liquid resin emulsion. For civil engineering applications (concrete sealers/primers, floorings, tile joints, cement modification…), adhesives.
(a) on 100% solid resin

Salicylic acid-free curing agents

Salicylic acid is an efficient catalyst of the epoxy-amine reaction. It has therefore been used for half a century as an accelerator in the formulation of amine-based hardeners for epoxy resins.

However, the classification of salicylic acid as a CMR (carcinogenic/mutagenic/reprotoxic) substance has caused its use in formulated products to be re-assessed. Since May 1^st 2020, the use of salicylic acid in formulated products is considered safe up to 3% m/m; above that concentration limit, the product should be treated as a CMR and should be classified and labelled accordingly.

In view of this situation, in QR Polymers we have decided to reformulate some of our epoxy curing agents typically used in the construction sector and make them completely free of salicylic acid. Our new amine adducts Q-RIT 315, Q-RIT 317 and Q-RIT 318 contain 0% salicylic acid. Not only are they compliant with the latest regulations, they also respond to our customers’ continuous search for more friendly products for now and for the future.

Lately we added Q-RIT 381 to our hardeners range. It does not contain any salicylic acid nor any VOC. This product allows faster cure and provides superior chemical resistance to epoxy floorings or paints.

Hardeners	Solids (% m/m)	Viscosity @25°C (mPa.s)	HEW (g/Eq)	Gel time (minutes) (a)	Uses and comments
Q-RIT 315	100	200-500	115	30	Salicylic acid-free. UV-resistance. Good mechanical, acid and solvent resistance. phr 60 (liquid resin, EEW 190)
Q-RIT 317	100	150-450	93	40	Salicylic acid-free. Superior resistance to carbamation / waterspotting. Good colour stability, good chemical resistance. For solvenfree self-leveling floorings, and paints. phr 50 (liquid resin, EEW 190)
Q-RIT 318	100	100-350	93	30	Salicylic acid-free. Superior resistance to carbamation / waterspotting. Good colour stability, good chemical resistance. For solvenfree self-leveling floorings, and paints. phr 50 (liquid resin, EEW 190)
Q-RIT 381	100	1000-4000	84	15-16	Salicylic acid-free, benzyl alcohol-free. O VOC. Superior chemical resistance. Alternative to Mannich bases. phr 44 (liquid resin, EEW 190)
(a) with a liquid resin (EEW 190), 100 g mix, measured @23°C

Besides, are you familiar with amidoamines? Solventfree amidoamines are in general suitable for use in various construction applications, too. For example in floorings or in solventfree concrete paints. Here we can propose medium or low viscous salicylic acid-free hardeners as well. In particular we recommend:

Hardeners	Solids (% m/m)	Viscosity @25°C (mPa.s)	HEW (g/Eq)	Gel time (minutes) (a)	Uses and comments
Q-RIT 436	100	500-1200	90	70-80	For solventfree self-leveling and trowelable floorings, mortars, patching compounds, adhesives and encapsulation systems. Can be used on green concrete. phr 47-50 (liquid resin, EEW 190)
Q-RIT 439	100	150-450	95	150	Low viscosity/long potlife curing agent for solventfree concrete primers, repair mortars, crack injection, castings, adhesives and tiles joints. Can be used on green concrete. phr 50 (liquid resin, EEW 190)
Q-RIT 653	100	250-500	115	30-40	Good substrate impregnation, outstanding adhesion to concrete and to humid substrates. Very good corrosion protection. For solventfree concrete coatings, concrete repair and high-solids primers. phr 60 (liquid resin, EEW 190)
(a) with a liquid resin (EEW 190), 100 g mix, measured @23°C

Low VOC curing agents

Volatile Organic Compounds or VOCs are organic chemicals having a low boiling point/high vapour pressure at room temperature. Most classical solvents widely used in the coatings, inks, varnishes and adhesives industries are VOCs. They are easily released in the atmosphere during process or from the finished products and they form air pollutants having detrimental effects on human health and on the environment. As a consequence, there is an increasing tendency to try to reduce VOCs and substitute them, whenever possible.

In Europe, various regulations have been put in place to control the use of VOCs. European Paints Directive 2004/42/EC on the limitation of emissions of VOCs due to the use of organic solvents in decorative paints and varnishes used in buildings and vehicle refinishing products sets maximum total VOC contents in the ready-to-use products.

In this directive, a VOC is defined as being "any organic compound having an initial boiling point less than or equal to 250°C measured at a standard pressure of 101,3 kPa". This means that, next to the classical solvents used in solventborne epoxy applications, some traditional diluents used in solventfree systems are also considered a VOC.

Curing agents used for civil engineering applications very often employ benzyl alcohol. Benzyl alcohol has, however, a boiling point of 204 °C and therefore classifies as VOC. In QR Polymers, we devote much effort in developing suitable alternatives.

One of the products recently introduced and met with much appreciation on the market is our amine adduct hardener RD-0190. This benzyl alcohol-free curing agent shows huge potential in replacing a conventional amine adduct when 0 VOC is required.

Another recent development is Q-RIT 381, a 0 VOC salicylic acid-free curing agent. This product allows faster cure and provides superior chemical resistance to epoxy floorings or paints.

See the product specifications below. For more information, please contact us.

Hardeners	Solids (% m/m)	Viscosity @25°C (mPa.s)	HEW (g/Eq)	Gel time (minutes) (a)	Uses and comments
RD-0190	100	Typically 800	93	30	Benzyl alcohol-free. O VOC. Excellent waterspot resistance. For use in floorings and other contruction applications. phr 50 (liquid resin, EEW 190)
Q-RIT 381	100	1000-4000	84	15-16	Salicylic acid-free, benzyl alcohol-free. O VOC. Superior chemical resistance. Alternative to Mannich bases. phr 44 (liquid resin, EEW 190)
(a) with a liquid resin (EEW 190), 100 g mix, measured @23°C

BLUE FIN for surfboards

There are two BLUE FIN systems, BLUE FIN 20 and BLUE FIN 25. The BLUE FIN 20 system has a guaranteed minimum biocarbon content of 20% when cured. Surfboards produced using the BLUE FIN 20 or BLUE FIN 25 system automatically qualify to carry the Sustainable Surf ECOBOARD LEVEL ONE label.

Product	Resin	Hardener	Mix ratio Resin: Hardener	Comments	Board labelling
BLUE FIN 20	BLUE FIN A20	BLUE FIN B BLUE FIN B FAST	2:1 by volume	Accredited at 23% biocarbon. Hardeners can be mixed in any ratio to fine tune reactivity.
BLUE FIN 25	BLUE FIN A25	BLUE FIN B BLUE FIN B FAST	2:1 by volume	Accredited at 29% biocarbon. Hardeners can be mixed in any ratio to fine tune reactivity.

Blue Fin 20 system data sheet: click here

Blue Fin 25 system data sheet: click here

Waterborne zinc rich primers

There is increasing interest globally for water-based industrial paints. Water-based zinc rich primers are difficult to prepare due to the reactivity of zinc powder with water, evolving hydrogen gas. As a result, solvent-based materials are still widely used. QR Polymers has developed an innovative concept of a water-free water-based hardener: RD-0205WH which has been specifically developed for this application. The zinc is dispersed in the hardener which contains no water and is mixed with the water-based resin component containing other fillers and additives with additional water to the desired solids content before application. Dispersions of zinc powder in RD-0205WH are stable to settling and do not produce gas on prolonged storage even at elevated temperatures.

RD-0205WH is an isolated amine adduct supplied as 70% solids in propylene glycol n-butyl ether. RD-0205WH is miscible with water and is designed for use with modified or non-modified standard liquid epoxy as well as with liquid resin emulsions and solid resin dispersions (such as E‑Pos 1011W55). RD-0205WH has an easy 1:1 recommended mix ratio with standard liquid epoxy resin (EEW 190 g/eq).

An additional benefit of RD-0205WH is its inherent pseudoplastic nature, increasing the stability and resistance to settling of zinc rich paints with the zinc dispersed into RD‑0205WH without water. Water and the resin component are added immediately prior to application.

RD-0205WH exhibits high reactivity at ambient temperature and forms excellent films when cured with solid or liquid epoxy resins.

RD-0205WH requires no ADR labelling.

水性环氧固化剂系列

毫无疑问当今水性环氧体系在土木工程和涂料领域的应用具有明显的优势。水性体系它环保，它提供工作的舒适度（如低气味）以及减少封闭环境下对操作者的毒性危害。它们不易燃，它们用水即可轻松清洗操作设备。水性体系在混凝土和潮湿表面表现出良好的粘接性，另外它们也能用于湿润的混凝土。

然而，操作者不愿意做“油转水”的切换是因为他们会碰到诸多问题，如：水性系统通常固化比较慢；它们应用的膜厚通常有限；固化后涂料由于不完全的成膜过程通常光泽较差；最后水性环氧体系的防腐效果，特别是在金属上的防腐效果常常被质疑，通常无法达到溶剂型体系的防腐效果。

可是在日益严峻的环境保护压力下，国家近年出台多个环保政策禁止溶剂型涂料的使用。

2015年2月1日国家对VOC含量超过420克/升(含)的涂料征收4%消费税政策。
国务院办公厅发布《贯彻实施质量发展纲要2016年行动计划》，明确提出开展含挥发性有机物涂料质量标准提升行动。
2016年3月2日国家发改委和商务部正式发布《市场准入负面清单草案（试点版）》，涉及多个涂料板块被禁限的产品项目。

在禁止溶剂型涂料使用的同时，国家今年密集出台各类政策鼓励和推广应用水性环保涂料：

2016年4月26日，发改委、工信部等24部门联合印发《关于促进消费带动转型升级的行动方案》，提出推广使用水性涂料等环保装修材料；
2016年5月18日，国务院办公厅发布《关于促进建材工业稳增长调结构增效益的指导意见》，指出要加快推广应用水性涂料产品；
2016年10月11日，工信部发布《建材工业发展规划（2016-2020年）》，提出推广应用水性、粉末和高固体分等低挥发性有机物（VOCs）的涂料，发展无污染、健康环保的装饰装修材料；
2016年10月14日，工信部发布《石化和化学工业发展规划（2016-2020年）》，提出加强环保型涂料产品的研发和推广应用，综合整治挥发性有机物（VOCs）；
2016年11月13日，工业和信息化部正式发布《国家鼓励的有毒有害原料（产品）替代品目录（2016年版）》《目录》，涉及大量的水性涂料替代溶剂型涂料产品项目。

面对水性环氧体系在中国市场的广阔应用前景，荷兰QR-Polymers公司相信，我们提供的水性环氧固化剂能满足市场的要求。通过研发和与客户的深入合作，我们不断提升产品品质和扩充产品品类以满足日前及未来市场的需求。让我们携手共筑美好未来。

固化剂	固含量 % m/m	粘度 @25°C (mPa.s)	HEW (g/Eq)	Gel time (minutes)	Uses and comments
Q-RIT 1051	50	30000-50000	210	120-180 (a) ≥ 6 hours (b)	Aqueous epoxy-polyaminoamide 水性环氧聚酰胺胺加成物型固化剂，不含助溶剂。用于混凝土或金属涂料；能在水中乳化环氧树脂；与金属和矿物基材包括湿润的混凝土具有良好的粘结性能。与液体环氧树脂（phr 110, 树脂EEW 190）或固体环氧树脂分散体配合使用。
Q-RIT 1061	50	13000-23000	210	120-180 (a) ≥ 6 hours (b)	水性环氧聚酰胺加成物型固化剂，不含助溶剂。用于混凝土或金属涂料；能在水中乳化环氧树脂；与多种基材具有良好的粘结性能；可稀释到低固含量以形成良好的混凝土浸渍；高弹性适用于金属表面；与固体环氧树脂配合使用具有良好的防腐特性。与液体环氧树脂（phr 110, 树脂EEW 190）或固体环氧树脂分散体配合使用。
Q-RIT 1071	55	18000-28000	230	60 (a) ≥ 6 hours (b)	Aqueous amine-adduct without 水性胺加成物型固化剂，不含助溶剂。用于防腐底漆、地坪、环氧改性混凝土、浆料；同时适用于较厚的系统;快速固化特性及早期抗水性。与液体环氧树脂（phr 120, 树脂EEW 190）或固体环氧树脂分散体配合使用。
Q-RIT 1072	55	7000-10000	225	120 (a) ≥ 6 hours (b)	Q-RIT 1071的慢速版；良好的保光泽性能；与液体环氧树脂（phr 120，树脂EEW 190）或固体树脂分散体配合使用.
Q-RIT 1075	40	15000-35000	415	90 (a) 120 (b)	水性胺加成物型固化剂，不含助溶剂,用于金属和混凝土涂料；优良的防水性和耐盐雾性；快速物理干燥性能，2-3天后完全固化；低色度及高抗紫外线性能，具有良好的保光泽性能；与液体环氧树脂（phr 220,树脂EEW 190）或固体树脂分散体配合使用.
RD-0205WH	70	Typically 10000	180	60 (a) ≥ 6 hours (b)	Amine-adduct, 70% solids in propylene glycol n-butyl ether. For waterborne dispersions. Can emulsify epoxy resins. Highly pseudoplastic. Can be charged with zinc in the formulation of zinc rich primers. Use with liquid epoxy (phr 100, resin EEW 190) or solid resin dispersion.
(a) 与液体环氧树脂（EEW 190）配合使用 @23°C (b) 与固体环氧树脂（EEW 450-560）配合使用 @23°C

可打印版本: 下载.

Resins	Solids (% m/m)	Viscosity @25°C (mPa.s)	EW (g/Eq)	Uses and comments
E-Pos 1011W55	55	800-5000	480-560 (a)	Aqueous dispersion of solid epoxy resin. For anticorrosive, industrial coatings and civil engineering applications (concrete sealers). Long pot-life, very good chemical resistance and mechanical properties.
E-Pos 1014	100	1500-4000	190-250	Emulsifiable liquid epoxy resin. For civil engineering applications (concrete sealers/primers, floorings, tile joints, cement modification…), adhesives.
E-Pos 1014W60	60	3000-13000	190-250 (a)	Aqueous liquid resin emulsion. For civil engineering applications (concrete sealers/primers, floorings, tile joints, cement modification…), adhesives.
(a) on 100% solid resin